Do you think you can’t burn duraflame logs in a gas fireplace? Well, you can! Like other fireplaces, gas fireplaces can burn this.
There are many ways to burn wood logs in a fireplace. You may have been burned by someone who says you can’t burn wood logs in a gas fireplace. However, you can burn wood logs in a gas fireplace with ease. The main thing to remember is that you should never burn dry wood in a fireplace. You must always have enough moisture in the wood. Dry wood won’t burn well.
So, Can I burn duraflame logs in a gas fireplace? If you want to make it possible, read this article.
All of the materials in a set of Duraflame logs are recycled materials. They contain no metal, plastic, or other toxic components.
These logs are made from a blend of pine and hardwood, which creates a smokeless burn and produces a soft glow instead of harsh heat.
Yes, you can use any wood to burn in a fireplace. Duraflame logs can be used in the same manner as other types of wood.
Duraflame logs are a type of wood-burning stove fuel designed to last for an extended period. Therefore, you can safely burn duraflame logs in a gas fireplace. First, make sure that your gas fireplace is installed correctly and adjusted. Then, light the logs and wait until they begin to burn vigorously before adjusting the flames accordingly. Do not leave the fire unattended; always use a safety screen and flare when burning duraflame logs in a gas fireplace.
Before you get started, sweep out the fireplace and let it cool to the touch. Fireplaces that burn wood and gas can quickly burn Duraflame logs by the following process:
- Make sure there is at least 2 inches of clearance around the Duraflame log when placing it in the grate.
- Avoid piling on logs if possible, as this will hinder their efficiency.
- Don’t close off your fireplace entirely; a draft from the door will ensure a healthy fire.
- Don’t ever use a flammable liquid to ignite a fire with a Duraflame log set.
- Put out the fire safely and efficiently.
- Don’t close the fireplace door or leave the residence until at least half an hour has passed since the Duraflame log fire has burned out completely.
- You risk severe injuries if you move, try to put out, or smother a Duraflame log while it is burning.
Before lighting your duraflame log in a gas fireplace, you need to know a few things:
- You’ll need to ensure the logs are seasoned correctly. Duraflame logs must be soaked in water for at least 24 hours before using them and then should be burned in a well-ventilated area with the oxygen shut off.
- Ensure your gas fireplace is lit and adjusted to produce the desired heat.
- Ensure the duraflame log is placed on an insulator such as cedar or stone to avoid fire hazards.
- Position the Duraflame log just on the fire pit grate.
- Set the lighter on top of the log and light it.
- Wait until the flame goes out, and then turn the log over.
- Remove the lighter from the log and light it again.
- Keep the log on the heat until it reaches a burning temperature.
To ensure that the Duraflame log is hot enough to start the fire, it should be glowing orange. If the log isn’t glowing orange, wait until it is.
You may need to experiment with the type of log to find the one that is right for your fireplace. Some Duraflame logs will only burn one way. Others will burn both ways.
Duraflame logs will last for approximately 25 hours, depending on the size and condition of the log. Duraflame logs must be relit every 4 to 8 hours to maintain their glowing glow. Duraflame logs can be relit easily using the provided match or lighter.
Duraflame logs are made of 100% natural materials. They burn for hours and can be a long-lasting alternative to traditional fire logs. Duraflame logs can be used in gas, wood-burning, or indoor fireplaces. So, can you use duraflame logs in a fire pit? I hope that you got your answer.